c10podcast

Terry and his team set out to build one of, if not the baddest 2wd Jimmy out there. Teaming up with Chris England from Chris England Concepts and the crew at Mobile Solutions Fabrication to knock out that stunning inteior, and many many more. They accomplished the task and debuted the Jimmy in the UP Car Parts booth SEMA 2022 and it was an absolute hit! After SEMA they were able to take Twisted out on the Twisted Tour, showcasing the build and the teams talents. The Jimmy won countless awards and before you know it - Terry had a few offers that he couldn't resist. Joiin me for the TWISTED story as I sit down with Terry Rose for Ep. 261 of C10 Talk. 

Episode #261 is brought to you by out Title Sponsor United Pacific Industries.

 https://upcarparts.com/c10-chevy-truck/ -Get your parts. Build your passion.

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? 

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 10% off your total order. 

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

www.mar-k.com - Simply the best molding for your buillds, made in the USA.

www.painlessperformance.com - It's time to repalce that old wiring harness, Painless has an option for you. 

Episode #248 is brought to you by out Title Sponsor United Pacific Industries.

https://upcarparts.com/c10-chevy-truck/ -Get your parts. Build your passion.

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - CPP your suspension, steering and brake source!

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

www.mar-k.com - Your #1 source for all of your trim and moldings, made in the USA! 

____________________________________________________________________

Lynzie always remembered her dads "Old Truck" but did she think should could ever get it back? Well once she knew it was still around, and with a little (A lot) help from her Boyfriend Drew, they found the truck and were able to bring it back to life. Of course there is more than meets the eye with this story as well. Lynzie's dad unfortunately took his own life, and Lynzie would like to use this truck, his truck as a symbol of "suicide prevention" and bringing awareness to others for a greater cause. 

Episode #246 is brought to you by out Title Sponsor United Pacific Industries.

https://upcarparts.com/c10-chevy-truck/ -Get your parts. Build your passion.

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - CPP your suspension, steering and brake source!

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

www.mar-k.com - Your #1 source for all of your trim and moldings, made in the USA!

www.accuair.com - Accuair has the Air Management and support you need to "Air it Out"! 

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 10% off your total order. 

www.us-mags.com - Cast or forged, they can customize your wheels to truly reflect your vision.

____________________________________________________________________

Zac Mertens aka, @mister_zachary from The Hoonigan's has been a fan favorite for over 6 years. In the C10 community we know him from Hoonigan, from his '74 C10, "Boomhauer" and now his 572 Big Block Jimmy!! 

Sit back, grab a cold one and enjoy the pod! Thanks for tuning in, Ronnie

Episode #244 is brought to you by out Title Sponsor United Pacific Industries.

https://upcarparts.com/c10-chevy-truck/ -Get your parts. Build your passion.

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - CPP your suspension, steering and brake source!

www.painlessperformance.com - Is it time to rewire that chassis - Painless Wiring has a wiring harness for you and your truck! 

www.us-mags.com - Rich in tradition, rich in style! 

____________________________________________________________________

C10 Parts and Products - C10 Billet mirrors, Tre5 Tailgate latch, and the Deadend Garage, 67-72 Dakota Digital mounting bracket! 

Let Jason at Deadend Garage know that you heard it here, but he is offering a show special on that bracket for $40 shipped, usually like $59 plus S/H! Thats a BIG Discount! So if you are running or thinking about running Dakota Digital Gauges in your 67-72 Chevy/GMC Truck - hit him up at Deadendgarage@yahoo.com 

Thanks for tuning in, Ronnie 

Episode #244 is brought to you by out Title Sponsor United Pacific Industries.

https://upcarparts.com/c10-chevy-truck/ -Get your parts. Build your passion.

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - CPP your suspension, steering and brake source!

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

www.mar-k.com - Your #1 source for all of your trim and moldings, made in the USA! 

____________________________________________________________________

Interviews from the 2022 C10 SLO Down - held in San Luis Obispo at the Madonna Inn. 

Episode #242 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - Get your Parts, Build your PASSION! 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - From their new X10 Spindle, to their re-engineered steering columns, they have you and your build covered! 

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 10% off your total order. 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.painlessperformance.com - When you are looking to swap out that old and brittle wiring  - Painless has a chassis and underdash solution for you. 

www.mar-k.com - When you want the BEST for your build, Mar-K is US made - Oklahoma City, Oklahoma. 

____________________________________________________________________

Todd Carpenter wanted to have a party in Grand Island, Nebraska, so he decided to auction of his collection of Classic GM Trucks. Over the years Todd has accumulated well over 75 trucks, and some serious parts too, so with his collection and Dave Hall from Restore a Muscle Car ( Lincoln, NE) teaming up they have over a 100 Classic GM/Chevy Trucks and they just put together a one of a kind auction, the "100 Squarebody Auction" and C10 Talk was there to cover the event. 

I was able to interview a few of the key players involved and bring it back to you! Here is #242, the 100 Squarebody Auction. Thanks for tuning in, Ronnie 

Episode #240 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - Get Your parts, build your passion! 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - CPP has everything from suspension, braking, fuel tanks and more for your build. 

www.azproperformance.com - Celebrating 10 years in the "taking care of the C10 Nation" business! 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.painlessperformance.com - Is it time to rewire that chassis - Painless Wiring has a wiring harness for you and your truck! 

www.us-mags.com - When you are looking for the right wheel for your build, think US Mags. 

____________________________________________________________________

Longbed Larry was supposed to be a dream come true for Steven. This '85 was his High School truck! He had a vision for how he wanted it. He had saved up a big chunk of change and now he thought he had found a "builder" to build the truck. 

Years later, Steven would have to take the project from the "builder" and his money was gone - LONG GONE!

Part #2 of the C10 Scam  - Thank You Steven and Ryan for sharing your stories, and hopefully by listening to your story someone else can possible escape a scam builder in the future. 

Episode #239 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - looking for steering, brakes or suspension components, CPP has you covered. 

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order. 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order. 

www.mar-k.com - Made in the U.S.A. Oklahoma proud - when you want the BEST for your build! 

____________________________________________________________________

Ryan Meyer thought he was handing his baby off, his C10 to be completely restored - New Chassis, New everything except that classic patina. Eric, drove all the way from Wisconsin/Minnesota to Florida to pick up the truck and a handful of cash - $Thousands of money to cover the labor. Years later Ryan had to make the decision to drive up and TAKE his truck back as it was not being worked on and Squarebody Specialties was shutting down. 

Hear from Ryan on what he would do different and if this podcast can help someone from getting screwed, we did our job! 

Happy Memorial Day C10 Nation!!

Episode #237 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

http://www.us-mags.com - When you want fitment, style, and value - US Mags has a wheel for you! 

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order. 

____________________________________________________________________

Brian Vowell is a huge part of the Arizona scene, from Truck owner/builder, SEMA, C10 Club Arizona, and Tre5 co-owner. As you can see Brian stays busy, whether he's running Frontier Shop Supplies, Tre5, or the Arizona chapter of the C10 Club! 

Tune in and get to know Brian. Thanks Brian for sitting down with us. Enjoy the Pod! 

Episode #236 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

http://www.us-mags.com 

A Honda Civic wrapped with a '68 C10 Metal!!

Mikey, aka Sawdust and Blinker Fluid, had the Civic, so why not make it look cooler. He found himself a 1968 C20 longbed and did just that. 

Enjoy the POD!

Episode #234 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.painlessperformance.com - Is it time to rewire that chassis - Painless Wiring has a wiring harness for you and your truck! 

www.psiconversion.com - Your LS/LT based motor wiring specialists. Wire it Up and Fire it Up!

www.mar-k.com - When you want the BEST made in the US moldings for your truck, think Mar-K! 

Deboss Garage is a successful YouTube channel based out of Eastern Canada, they build all kinds of rad stuff and showcase it on their channel. 

One of their latest projects is the "Shermanator" an old Tank base with a Crew Cab Squarebody on the top! Yep, a Squarebody Tank! So Awesome! 

Who else wants to drive it? LOL. 

We talk with Rich and Aaron on how they got it, what they've done to the tank, and most importantly  - what they plan on doing with this thing!! DAMN SON! 

Enjoy the Pod, and please share it, like it, and leave us a review! 

Humberto from Vulcan Specialties host this weeks pod as he was up in Salt Lake hanging with Joel from Overkill Racing and Chassis, and David Engle, from Engle Brothers Fab. 

These three together is probably illegal in a few states, but somehow they pulled this podcast off. 

A ton of into from C10 Trucks and build at home chassis. K5 Blazers that one could only dream about and a fictional 6 door, 10 tire/wheel C60 that they guys have dreamed up while at Disneyland. You can't make this $hit Up! 

Episode #231 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order. 

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order. 

Cougar from C10 Sales stops by for a second episode of the hardest working guy in the business. 

Episode #229 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.vintageair.com - Vintage Air has a sure fit kit for you and your C10 - Made in the USA! 

www.painlessperformance.com - Is it time to rewire that chassis - Painless Wiring has a wiring harness for you and your truck! 

www.mar-k.com - When you want the BEST for your build, choice Mar-K. 

www.us-mags.com - So many RAD wheels to choose from for your build, check them out US dash MAGS dot COM!!

How about a little C10 Roundtable with GSI - Scott, Poised Mikey, Chuck See, and yours truly on the "Welcome Back" kick off episode of 2022! 

www.reuniontruckshow.com for the link on the NEW "REU10N" truck show in Chandler, AZ 2022! 

Quick wrap up with yours truly as we get ready for 2022!! Thanks for tuning in and the continued support. Have a GREAT New Year everyone and please be safe out there. 

Episode #227 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order. 

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

www.mar-k.com - When you are building the best, expect the best for your truck build. Made in the USA.

www.us-mags.com Picking the right wheel, can make or break your build, take a look at US Mags for your next set of wheels for your truck.

Mike Millan, is a Husband, Father, Classic truck lover, Friend, Club Member and CANCER SURVIVOR! 

Tune into episode #227 of C10 Talk to hear Mike "Moon Beam" Millan's amazing story of perseverance throughout his life. 

Oh ya, there is a truck story too. Mike's step dad, Jack left him a 1976 Stepper when he passed, and at the time Mike wasn't really interested, well fast forward a few years, and his 1976 C10 "Poised Hipster" helped him at times continue to drive and fight through his cancer. 

Every Truck has a Story, in this case its a whole lot more then just a truck story! 

Thanks Mike for your time and inspiration. 

You can visit Mikes blog to learn more about Mike and his journey. 

www.mikemoonbeam.com

This RETRO release is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order. 

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.airliftperformance.com - When you are thinking about Air Management  - Think Air Lift Performance! 

www.painlessperformance.com - Is it time to rewire that chassis - Painless Wiring has a wiring harness for you and your truck! 

Retro Release back to episode #5 with the one and only Rene Martinez, aka - The C10 King! 

Episode #224 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10% 

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

www.airliftperformance.com - When you are thinking about Air Management  - Think Air Lift Performance! 

www.painlessperformance.com - Is it time to rewire that chassis - Painless Wiring has a wiring harness for you and your truck! 

www.mar-k.com - Your Made in the USA parts source for Bed Wood, and molding and trim. If you want the best for your truck, think Mar-K. 

Thanks for checking out Ep. #224, Interviews from C10's in the Park, Waxahachie, TX -

With over 1200 Trucks at this years event, it was the biggest so far. So many Rad trucks, and the people to go with it. Later after the show, the Party on the Square kicked off downtown Wax, with the crazy, nerdy rock band the Spaz-Matics. 

Another Great show - Great Job Terry and Crew. Thanks for your continued support and hospitality. 

Episode #209 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.mar-k.com - When you want the BEST trim for your build, Mar-K is made in the USA, and is the highest quality trim for our trucks. 

www.us-mags.com - When you want a wheel that stands out for your build - think US Mags. 

www.psiconversion.com - When you are swapping that motor for an LS or LT based motor PSI has everything you need, including technical support! Use "C10 Talk" to save 5% off your total order.

www.azproperformance.com - When you are ready to upgrade from stock - Pro Performance has what you need.

Coverage from the 2021 C10 Intervention. 

Episode #222 is brought to you by out Title Sponsor United Pacific Industries. 

www.UPcarParts.com - More than just truck lighting; bumpers, brackets, door parts and more. 

www.brotherstrucks.com - Your source for 1947 Chevy and GMC restoration truck parts. 

www.classicperform.com - Have you seen their new X10 Spindle, how about their fuel cells? Use "C10 Talk" at check out and save 10%

www.dakotadigital.com - The best upgrade for your cab - VHX, HDX, and the Retro Rad RTX! 

www.airliftperformance.com - When you are thinking about Air Management  - Think Air Lift Performance! 

www.painlessperformance.com - Is it time to rewire that chassis - Painless Wiring has a wiring harness for you and your truck! 

www.psiconversion.com - When you are upgrading to an LS/LT based motor - PSI is your Wire it up, and Fire it Up store, and you can use "C10 Talk" and save 10% off your order. 

Harry Bentley Bradley, landed his Dream Job, being a GM designer out of college, recruited by all the bigger automotive companies, he choose GM! Later HBB would be hired by Mattel to start and design the first Hot Wheels cars/trucks. 

I hope you enjoy the episode.