fully threaded radio

Shaking up the world of hard to locate metric fasteners, Craig Penland explains the unique business model of Eurolink Fastener Supply Service (1:29:24). Solution Industries boss, John Radel talks shop, and announces a shake up of his own (24:27). Plus, Mr. Harry Moser of The Reshoring Initiative discusses exciting progress in the effort to bring manufacturing back to the U.S. and describes a new program designed to help importers make the right decisions (44:52). Mike McNulty presents the Fastener News Report, and welcomes Würth EVP, Marc Strandquist, as they discuss the latest FDI survey results (1:01:12). Carmen Vertullo offers still more expertise on the topic of torque during the Fastener Training Minute (1:25:12). Brian makes a rare appearance on Twitter, while Eric angles for a free concert T-shirt. Run time: 02:15:03

An exciting new era of fastener distribution appears imminent as Mike Ricciardi of ITW Shakeproof and Bryan Wheeler of Star Stainless report on the YFP Leadership Conference that focused on the disruptive technologies that have begun to impact the industry, launching an all new season of fastener talk radio (1:15:55). Raconteur and Fastener Professional of the Year, Mr. Robbie Gilchrist notes important trends to watch in the coming year (21:31). FTI editor, Mike McNulty hosts Baird analyst, Quinn Fredrickson, closing out the FDI numbers for 2017 and setting expectations for the coming quarters on the Fastener News Report (51:20). Fastener Fair USA show manager, Jessica Boweak presents the latest updates on the industry’s newest expo (43:45). Plus, industry swami, Carmen Vertullo talks torque on the Fastener Training Minute (1:09:40). Brian has returned from his walk-about with fresh supplies of Vegemite, while Eric wonders if that’s what the future really needs. Run time: 02:07:48

Fastener industry leaders Bruce Wheeler, of Star Stainless, Bill Derry, of Field Fastener, and Adam Pratt, of Sherex Fastening Solutions appeared together during a panel discussion at the recent International Fastener Expo in Las Vegas. FTR was there, and we are honored to share this wide ranging discussion as the podcast season finale. Plus, latest FDI reading, the Chevy Bolt, and ITR’s key leading indicators. Run time: 01:19:17

Self-driven to excel in the fastener game, industry rock star and Stelfast president, Simmi explains state of the art forecasting, what to watch for in the coming quarters, and her choice of victuals in Vegas (1:24:04). Parker Fasteners is leading the market in the use of 3D printed samples. Millennial fastener pro, Matt Boyd describes their recent exhibit at IFE, and real world applications of this burgeoning technology (23:16). Baird analyst Quinn Fredrickson joins Fastener Technology International editor, Mike McNulty with the latest FDI numbers, and wider industry economic developments, on the Fastener News Report (52:37). Plus, Carmen Vertullo talks torque on the Fastener Training Minute (1:18:30). Brian and Eric discuss news of an unfortunate collision, but decide to question the intelligence of almost every headline they see. Run time: 02:11:51

During a landmark podcast that will stand as a historic marker of many lives in fastening, industry pro jocks Jake Davis, of BTM Manufacturing, and Baron “Best Beard” Yarborough, of Spring Bolt and Nut, join in for the annual Vegas show round up (1:20:32). Fellow luxury resort connoisseur, Bill Akerfeldt of Lindstrom comments on recent price increases as well as accommodations at the show (31:01). Würth EVP Marc Strandquist evaluates FDI numbers with industry anchor, Mike McNulty, on the Fastener News Report (48:12). Continuing his recent marathon of fastener show seminars, Carmen Vertullo presents an extended Fastener Training Minute, addressing ROCAP testing for structural bolts (1:11:30). Plus, the lovely and talented Lynn Dempsey with interviews aplenty from the show floor. BONUS: What does industry legend, Bill Unferth, have to say about Bill Derry’s naughty side...? (2:05:42) Brian and Eric compare notes on spending time in the FCH booth (mostly) for another year.
Run time: 02:13:29

The fastener industry continues to surge, as its key index remains well into expansionary territory for the seventh month running. Fastener Distributor Index co-creator, Holden Lewis, discusses the success of the monthly benchmark, and also his new position as CFO at Fastenal (1:14:11). Field Fastener president, Bill Derry shares his philosophy and formula for success upon his induction into the Fastener Industry Hall of Fame (21:27). Fastener Technology International editor Mike McNulty presents the Fastener News Report with guest commentator Dan Zehnder, of Trinity Logistics Corporation (47:28). Emerald Expositions show organizer Courtney Harold previews the 2017 fastener show, newly renamed the International Fastener Expo (36:35). Bonus redux: WIFI co-founder, Pam Berry reports from the “inner sanctum” during NIFS 2012 (1:59:16). Also, industry consultant Carmen Vertullo talks thread strength during the Fastener Training Minute (1:07:21). Brian and Eric announce the release of the new “Screwgle” FCH search interface. They also note the troubles many people are enduring in the aftermath of back to back tragedies, and suggest listeners rise to the occasion. Run time: 02:04:45

As the eyes of the world survey the devastation of hurricane Harvey, the fastener industry braces for a different kind of landfall. Purple ponchoed storm rider, Baron Yarborough, of Spring Bolt and Nut reports from Houston, Texas. From higher ground in the midwest, Jake Davis of BTM Manufacturing drops in to share his thoughts on growing the business, the upcoming Vegas show, YFP, and a life in the fastener industry, from the filing cabinet to the warehouse and beyond (18:19). Bob “GQ” Baer joins industry anchorman Mike McNulty to explain the July FDI numbers, and also to note signs of impending price increases (55:58). Plus, Carmen Vertullo examines the important differences between hex bolts and hex cap screws, on the Fastener Training Minute (1:22:04). Meanwhile, Brian and Eric do what they do, and narrowly avoid an embarrassing screw up. Run time: 01:39:20

The health of the fastener industry appears robust, even as the federal government works diligently to destroy healthcare for the country, as industry scion and fastener philosopher, Mr. Charlie Kerr joins in with a stream of consciousness appearance on an array of topics (1:22:33). Industry veteran, Jonathan Koch of Industrial Metal Finishing describes the impact of the booming energy market, and explains how LinkedIn can act as an invisible hand toward sales success (15:50). The FDI provides another shot in the arm with its latest numbers, as described by Mike McNulty with Frank DeVito of Solution Industries on the Fastener News Report (54:53). Carmen Vertullo has the prescription to an all too frequent bolt torquing question, during the Fastener Training Minute (1:15:43). Plus, Fastener Fair Mexico review and Fastener Fair USA preview with Mack Brooks’ Melissa Magestro (46:59). Brian and Eric aren’t quite sick that their annual fishing trip is over, but an imminent return to the lake would be what the doctor would order, if only their insurance plan covered it. Run time: 02:09:29

Doing the right things and paying attention to new technology pays off for successful fastener companies like Volt Industrial Plastics, as Mr. Joe Volltrauer describes his lifetime of entrepreneurial pursuit and 25 years at his most recent endeavor (1:20:24). Longevity also requires persistence and dedication, as demonstrated by industry anchorman Mike McNulty when he presents the 100th edition of the Fastener News Report, this time joined by NFDA president Marc Strandquist on the latest FDI numbers, and Rich Cavoto, of Metric and Multistandard, with MWFA golf outing results (43:12). FastenerTech 17 wrap up, NCFA Distributor Social report, show floor interviews with the lovely and talented Lynn Dempsey and YFP board member Baron Yarborough (30:35), and a bold statement on 3D printing from screw biz expert Carmen Vertullo, on the Fastener Training Minute (1:12:33). Plus, a report on logistics at the new site of NIFMSE. Operating in a free market enterprise of their own design, Brian and Eric explain that there’s really no wrong place to be, as long as you take the monorail.
Run time: 01:56:10

It’s a gnarly fastener talk radio laser flip, as California kids Chris and Ryan McCaffrey of R&D Fasteners hang ten during their podcast debut (1:27:41). Bob “GQ” Baer and Marty Nolan preview the Fastener Summit (21:28). During the Fastener News Report, industry anchorman Mike McNulty hosts Baird analyst Dave Manthey to explain last month’s apparent tailslide in the FDI (58:53). Fastener top gun, Carmen Vertullo, pulls off a wicked hydrogen embrittlement 360 with his top ten must-know list about this persistent industry menace (1:21:25). Plus: YFP board member Baron Yarborough covers the recent SEFA/SFA table top show. It's "scary but fun" as Brian and Eric goofy foot while they purvey their usual brand of industry prattle. Run time: 02:21:02

Fastener Professional of the Year, Mr. Robbie Gilchrist, reacts to being chosen by the NFDA for its new industry accolade (1:32:48). Christie Jones of Spirol International Corporation explains the many benefits of new finishing process, ArmorGalv (39:24). Fastenal business development manager, Jeff Kammerer describes the Mansco acquistion (55:52). On the Fastener News Report, Mike McNulty presents the headlines and discusses the latest surge in the FDI with Bamal president, Kevin Miller (1:04:12). Plus, Carmen Vertullo gets technical on the Fastener Training Minute (1:26:16). Brian and Eric share their experiences at the recent NFDA and Pac-West joint conference, and marvel at media buzzword hype. Run time: 02:13:18

There's no shortage of drama in the fastener industry, as surging optimism and idealistic youth align against ongoing consolidation and off-shoring. Throw in a few industry events and some fake news headlines and you get pretty exciting fastener talk radio. Jim “Big Papa” Kelam, of Sems and Specials weighs in on industry trends, Vegas, retirement, and the new breed of fastener pro, along with Jackie “Kind of a Big Deal” Ventura (1:09:20). YFP board member, Kenny Sanker, describes the AIM mentoring program (18:02). Also, SEFA president, Terry Windham previews the upcoming joint conference with SFA (34:09). Fastener News Report anchor, Mike McNulty and Baird analyst, Dave Manthey examine the shocking FDI numbers (40:10). Plus, senior fastener industry consultant, Carmen Vertullo gets fully threaded during the Fastener Training Minute (1:03:55). Brian and Eric remain philosophical as they play their role in the perennial saga that is the thread game. Run time: 01:50:07

Great walls and mass migrations impact the fastener industry. Thread adventurer, Rob Lucas, of Lindstrom (1:14:46), and domestic manufacturing crusader, Harry Moser, of the Reshoring Initiative (20:20), present their perspectives on these and other forces as they drive the screw biz in a somewhat great leap forward. Würth EVP, Marc Strandquist joins industry anchorman Mike McNulty on the Fastener News Report to discuss surprising January FDI numbers (48:07). Plus, fastener wonk Carmen Vertullo explains a common problem with thread pitch and plating on the Fastener Training Minute (1:07:46). Brian and Eric uncover no ancient secrets, but keep an eye on Amazon, and struggle with their Chinese zodiac identities. Run time: 02:02:03

With the onset of a new year, the fastener industry seems primed for action. The latest season of online fastener talk radio begins with a conversation with Link Magazine publisher, Mr. Leo Coar, who notes that forty years are just the start, and things are looking good for the little guy as far as he can tell (18:55). Andy Pels, of ScrewCrew.com and Mike Topolewski, of Perigee Manufacturing, look back at the previous year, then shift focus to their positive feelings for 2017 (1:15:34). The FDI numbers for December tell of similar positive sentiment throughout the screw business, as Fastener Technology International editor, Mike McNulty and R.W. Baird analyst, Dave Manthey, explain during the Fastener News Report (43:39). Plus, industry virtuoso Carmen Vertullo explains the finer points of wedge tensile testing, on the Fastener Training Minute (1:09:03). Brian and Eric consider the right time of year to eat crawfish, and urge listeners to become part of their favorite online fastener sourcing network. Run time: 02:04:38

Big oil, politics and fastener distribution. Dirty business? Find out that and more as Duncan Bolt honcho, Mr. Andy Cohn presents his thoughts in the wake of the presidential election and amid swirling talk of price increases (1:10:32). Star Stainless west coast lieutenant, Kevin Chavis previews the upcoming Pac-West / NFDA joint conference and table top event (27:28). Industry anchorman, Mike McNulty and Kelly Cole of Hayes Bolt find budding optimism in the latest FDI numbers on the Fastener News Report (44:38). Specifying zinc plating isn't always as simple as it may seem, as Carmen Vertullo describes on the Fastener Training Minute (1:04:38). Plus, have we finally discovered the true identity of Traveling Salesman? Meanwhile, Brian and Eric find cause to remember their Objectivist past, and make suggestions on avoiding the “T word”. The final predominantly fastener-related episode of the podcast season may be dirty, but at least it's safe. Run time: 01:59:53

It might be, it could be, it is another installment of predominantly fastener-related talk radio, as Lindstrom VP, Dick Ripley announces an important acquisition for his team and describes market conditions from his sky box view (19:34). Matt Delawder, of SWD, and John “Cool Hand” Butler, of The Olander Company, are up next, to review the 2016 Vegas Fastener Show (1:11:30). Learn to step up to the plate when explaining problems to suppliers on the Fastener Training Minute with Carmen Vertullo (1:05:20). Also, October FDI results and the winners of this year's FTR/FTI Scholarship awards. Plus, a line up of NIFS attendee interviews, including Eric's mom! Brian and Eric pinch hit for McNulty, as they bask in a fastener field of dreams, come true after 108 years. Run time: 02:09:44

In an episode jammed with fastener industry headlines like a west coast port during a shipping crisis, Jackie “Kind of a Big Deal” Ventura and C&H International operator, Charles Chang open with a look at the recent bankruptcy of shipping company, Hanjin. BBI president, Jun Xu, discusses the implications of Brighton becoming a publicly traded company (1:15:16). MWFA president, Bob “GQ” Baer and John “Cowboy” Wachman review the recent Fastener Training Week in Chicago (27:39). The FDI ticks up, and Mike McNulty hosts past NFDA president, Casey McIlhon to review the most recent survey responses on the Fastener News Report (50:56). Also, Carmen Vertullo presents another informative Fastener Training Minute (1:09:06). Bonus: Exciting NCFA Screw Open results! Brian and Eric look at 3D parts for autos, and conclude you've won if by land… Run time: 01:51:57

When Kerr Lakeside boss, Charlie Kerr, offers his thoughts on the state of the fastener industry, the presidential race, and his favorite baseball team's chances for a pennant, it's a slice of fastener radio pie you cannot afford to pass up (1:13:20). NFDA president, Marc Strandquist joins Mike McNulty to assess the screw biz in light of sagging FDI numbers on the Fastener News Report (43:02). The crew from Peak Innovations Engineering discusses their ultrasonic approach to joint testing (14:41). Plus, on the Fastener Training Minute, Carmen Vertullo offers practical advice to solve a common thread problem (1:08:13). Like enraged chefs at a soiree gone awry, Brian and Eric launch pastry at yet more government stoogism. Run time: 02:02:52

There are no distractions as NFDA board member and Hayes Bolt VP, Kelly Cole (1:14:36), and journeyman fastener rep, Rick Rudolph (10:58), stop in to share their thoughts on current industry trends and issues. The laser focus continues as screw biz anchorman, Mike McNulty, presents the Fastener News Report and examines June FDI results with BB&T analyst, Charles Redding (48:45). Also, Carmen Vertullo presents another informative Fastener Training Minute (1:08:49). Brian heads south, and Eric offers his thoughts on avoiding the squirrels. Run time: 01:50:55

In the battle for fastener industry success, it's important to make the right choices, which are sometimes not the same for everyone. Reluctant industry legend and 2016 Fastener Hall of Fame inductee, Bruce Wheeler of Star Stainless makes this case during a landmark interview (1:12:42). The FDI ticks up, and Mike McNulty explores the reasons why, along with BB&T Capital Markets analyst, Charles Redding on the Fastener News Report (50:54). The MWFA table top show and golf outing were great successes again this year, as described by Bob "GQ" Baer, Nancy Rich, Ruth Dowling, Steve Greenberg and more (14:12). Plus, Beacon Fasteners sales manager, Kameron Dorsey drops in with updates from the FIC (39:43). Also, fastener guru Carmen Vertullo presents the Fastener Training Minute (103:43). Brian and Eric discuss a glitch with FCH SourceFinder and 3-D printed airplane parts, then choose to spend the rest of the month on the lake. Run time: 01:47:28