mach3

CNC Router Tips Podcast Season 2 Episode 70: The Perfect Storm.

The Perfect Storm: CNC Router Tips Podcast Episode 70 Season 2: CNCRT70S2

Don't Get Caught Without a Backup: Tips for Choosing a PC for Mach3, Mach4, and Pathpilot.

In this episode of the CNC Router Tips Podcast! We're gonna talk about how to choose the right PC for running Mach3, Mach4, and Pathpilot. Whether you're an experienced CNC operator or just starting out, selecting the right computer is essential to keep your machine running smoothly and efficiently.With so many options available, it's easy to get lost in the specs and features. But here's a word of caution: don't forget to have a replacement PC ready to go! Long outages can be frustrating and costly, especially if you're running a business. So, make sure you have a backup computer ready in case something goes wrong.

In this episode, we'll walk you through the essential requirements for running Mach3, Mach4, and Pathpilot on your PC.

Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/69s2

Key takeaways:

• Workholding is essential for CNC router Table success.
• Holding multiple parts is more efficient than machining one parts at a time.
• Fixture plates can make work setup easier and more repeatable.
• Vacuum Tables are widely used to hold large parts.
• Give Painters tape and CA Glue a try.
• Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.

• When to choose a Parallel Port:
• When to use USB
• When To use Ethernet:
• Using Pathpilot CNC software.
• Mach4 CNC software
• External Motion control device:

CNC Side Hustle Roadmap https://cncroutertips.com/roadmap
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured Bill Griggs contact info:
Twitter: @BillGriggs


Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/70S2

CNC Router Tips Podcast Season 2 Episode 67:
New G-Code Shortcuts


New G-Code shortcuts that could save you time and improve your workflow. In this episode of the CNC Router Tips Podcast Bill Griggs shares the many new software tools and developments that could change the CNC Game for good.

Recent advances in computer hardware and software are having a rapid impact on how people use their CNC machines. Newer more advance Stepper and servo motors have made the machines more accurate and dependable. While changes in software have made the machines easier to operate.

No software advance has been as rapid as the introduction of AI artificial Intelligence to generate G-Code. Bill discusses his brief experience with AI generated G-Code and what it could mean to you.

If you would like more information about CNC Router tables you might enjoy joining the #CNC Router Tips Facebook group. This group has over 20,000 active members who share what they know about CNC Router tables and how to use them. If youu would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips

Sample of AI Generated G-Code Query

Prompt: write g-code to move a 1/4" bit from the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction. Plunge the bit down to -.25", and climb cut a two inch square. Retract the tool bit to a safe distance and return to the starting point.


Response:

Assuming that the machine is already set up and the workpiece is properly clamped, here is the G-code to move the 1/4" bit from the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction, plunge the bit down to -.25", climb cut a two-inch square, retract the tool bit to a safe distance and return to the starting point.

G90 ; Absolute positioning
G20 ; Units in inches
G0 X2 Y1 Z1.0 ; Move to the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction
G1 Z-0.25 F5 ; Plunge the bit down to -.25" at a feedrate of 5 inches per minute
G1 X2.5 Y1.5 F10 ; Climb cut a two-inch square at a feedrate of 10 inches per minute
G1 X2 Y1 Z1.0 F5 ; Retract the tool bit to a safe distance and return to the starting point


Please note that the feedrates and tool speeds specified in this code are just examples and may need to be adjusted based on the specific characteristics of the machine and the material being cut.


Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/67s2

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.


The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
ChatGPT https://chat.openai.com/chat
Open AI: https://openai.com/
Shopbot: https://www.shopbottools.com/
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured

Wunderbare Gäste und Experten stellten sich in der Talk-Runde den Fragen von Thomas Kabke-Sommer. Ist Hören der neue Gewinner der Digitalisierung und kann eine mögliche Zauberformel – um im Dschungel der unzähligen Audioangebote zu bestehen – Relevanz sein? Diese These unterstellt relevante Inhalte sowohl für den Content-Lieferanten als auch für die Werbetreibenden. Wie trifft man heute Entscheidungen für den richtigen Audio-Content, zur rechten Zeit am rechten Ort für die richtige Person? Smarte Daten flankieren auch den Bereich Online Audio und helfen bei der Portionierung und der Programmgestaltung. Folgen Sie der spannenden Diskussionsrunde mit bekannten Gästen aus der Audio- und Digitalwirtschaft: Sven Bieber (Head of Ad Sales bei Spotify Germany) Alexander Graf (Gründer und CEO von Spryker) Vincent Kittmann (OMR-Podcast-Chef) Dirk van Loh (Geschäftsführer Regiocast) Das Special wurde live von der MACH 3 Veranstaltung „Audio Revolution Live-Podcast“ in der Sturmfreien Bude am 20. Mai 2019 in Hamburg aufgezeichnet. Die Fragen stellte Thomas Kabke-Sommer.

CNCRT61: CNC Automation with Mike Gencarelli
CNC Router Tips Podcast Episode 61


IN this episode we talk with my friend Mike Gencarelli about CNC automation. Mike Gencarelli is an experienced tool maker, automation expert, software developer and has probably one of the most interesting garage workshops.

Gencarelli writes about his adventures on his website https://mygarageshop.com/ where he displays his projects and talks about his machine shop which includes everything from CNC Router Table, Plasma cutter to milling machine.

Mike has built quite a wide variety of automated machines in his past. His work on an automated parachute harness sewing machine got him noticed Later he began work on a plasma table with a dual chamber water table and a removable 4th axis.

Mike Gencarelli decided that he wanted to automate some common CNC options to make them work better with Mach3. He developed software which allowed him to use multiple wifi relays to turn his equipment off and on. He hooked up his duct collection system, lights and water pumps to his SmartScreens Interface for Mach3 . SmartSreens for Mach3 integrates the control of simple to add Expansion Relays and Smart Wi-Fi Devices which can be controlled by SmartScreens through Mach3 via buttons on the screen, and MCodes in the GCode.


Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://cncroutertips.com/60
Facebook LIve https://www.facebook.com/cncroutertips/videos/263559501017533/

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.

SmartScreens https://ngeneyes.com/smartscreen/licensing/
My Garage Shop https://mygarageshop.com/
SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw
Towbot http://towbot.com
Velox http://velox.com
Video tour of My Garage Shop https://www.youtube.com/watch?v=kSltNI0Gi7o
Students Make a CNC Router Table https://www.youtube.com/watch?v=H_SFnWiSWiw
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
CNC Zone http://www.cnczone.com
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/user/bgriggstwcny
OBS Studio https://obsproject.com/
Smove Mobile http://smove.com
Mastercam https://www.mastercam.com/en-us/
Stepcraft https://www.stepcraft.us/q
Microphones http://podcastbyfriday.com/mics

Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.

Go to this page. https://itunes.apple.com/us/podcast/cnc-router-tips-podcast-spreaker/id1031116372?mt=2

Click "View in iTunes"

Next Click on ratings and reviews in iTunes

Click the "Write a Review" button

Leave an honest rating and write a review.

If you want your CNC Router table to uses inches or millimeters you will need to know how to set native units in mach3 cnc software.

I will show you how to easily change between millimeter and inches. I will show you step by step what to do and what not to do.

After you set up the native units you can use my other videos tutorials to show you how to set up the number of steps per unit automatically.

CNC Router Tips Podcast Episode 11:

How To Set Up Constant Velocity Mode in MACH3.
Q: Bill, I got a question about setting your Mach3 acceleration and Velocity setting in Mach3. Should I use Constant Velocity? I also wondered if the A axis and the Y axis settings have to be exactly the same?
Show Sponsor
The Makers Guide http://themakersguide.com
Links mentioned
International Podcast Day. #podcastday
http://cncroutertips.com/
http://cncroutertips.com/podcast
http://www.themakersguide.com/home/tutorials
http://www.themakersguide.com/home/products/mach3
http://cncroutertips.com/resources
http://themakersguide.com
htttp://cncroutertips.com/cncrt09
#podcastday
TERMS
Look ahead
Acceleration
Exact stop
Constant velocity
The lower the acceleration of the machine axis, the greater will be the radius of the rounded corner
How we do it:
In Mach3 you can set the velocity mode to either exact stop or Constant velocity. To do this go to General Configuration Logic the settings tab (page) and look for a button located above the Reset Button which says “Set Steps Per Unit”. Use this button to enter a distance to travel. Measure the actual distance traveled then enter the corrections.
Software:
If you would like to download a demo copy of Mach3, Check out this webpage. Go to http://www.themakersguide.com/machdemo

CNC Router Tips Podcast Episode 09:

How To Set Up Your Stepper Motors The Right Way in MACH3.

Q: Bill, I got a question about setting your Mach3 acceleration and Velocity setting in Mach3. I also wondered if the A axis and the Y axis settings have to be exactly the same?

Links mentioned
http://cncroutertips.com/
http://www.themakersguide.com/home/tutorials
http://www.themakersguide.com/home/tutorials/membership-module-1-install-mach3/setting-steps-per-unit
http://www.themakersguide.com/home/products/mach3
http://cncroutertips.com/resources
http://themakersguide.com

How we do it:
In Mach3 you need to calibrate the AXIS Steps per Unit. To do this go to the settings tab (page) and look for a button located above the Reset Button which says “Set Steps Per Unit”. Use this button to enter a distance to travel. Measure the actual distance traveled then enter the corrections.

Videos:

Mach3 Tutorial – Setting Steps Per Unit https://www.youtube.com/watch?v=EVrqObwaAF4

Software:
If you would like to download a demo copy of Mach3, Check out this webpage. Go to http://www.themakersguide.com/machdemo

CNC router tips podcast episode 08:
How To Use an Xbox 360 Controller with MACH3.

Q: I saw you using an Xbox controller in one of your video to operate their CNC. How did you do that? I know some people use it to jog the machine and execute g-codes. I need some help.

Resources:
http://cncroutertips.com/
http://www.cncroutertips.com/xbox360
http://amzn.to/1JJOCjy
http://www.machsupport.com/wp-content/uploads/2013/04/ControllerPluginHowToUse.pdf
http://cncroutertips.com/resources
http://themakersguide.com

How we do it:
We use an Xbox 360 Wireless controller for Windows to operate our CNC Router Table in Mach3. Download the plugin from the Machsupport website and load it into Mach3. Install the included wifi receiver and pair the controller with your computer.
Then we can assign functions to each button and stick on the Xbox360 wireless controller. These functions will allow us to control the CNC Router remotely.

Videos:
Aluminum CNC Router Gantry https://www.youtube.com/watch?v=9cJFjz0R0KE
Software:
If you would like to download a demo copy of Mach3, Check out this webpage. Go to http://www.themakersguide.com/home/products/mach3

Jeff asks Where To Start learning about CNC Router Tables. We provide him a variety of resources and websites to help him cut through the confusion.

Resources mentions in the show.

http://cnczone.com
http://routerforums.com
http://themakersguide.com
http://makermasters.com
http://vectric.com
https://www.youtube.com/user/bgriggstwcny/channels
http://www.cncroutertips.com/start-here/

If you have a question for the show you can leave a voice message at http://www.cncroutertips.com/ask-me/. Or on speakpipe at
https://www.speakpipe.com/CNCROUTERTIPS.