woodtalk

In this episode, Mark contemplates buying a nibbler. Bruce gets wrecked by his tractor shed. Drew is nearing the end with his hexagon organizers. Plus a ton more!

SUBSCRIBE TO DIRTtoDONE on YouTube: http://tinyurl.com/DIRTtoDON

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/

 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-The Mercury Woodworker
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Bruce Clark
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks

New: 
-Stephen Goggin

Support our sponsors:

MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html) 
Montana Brand Tools: “GUNFLINT10”
Monport: “GUNFLINT6”

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/xRFe5bELcyE?si=rXBq3csbaaBq7quz

Drew's most recent video:
https://youtu.be/uVlsKXiIoXo?si=7C3E3sYKkZz6uPIV

Mark's most recent video:
https://youtu.be/a701NsPo4ss?si=96H_AiQVVNV1YvbL

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark wants revenge on Best Buy. Bruce digs some post holes for the tractor shed. Drew makes a ton of ornaments on the laser. Plus a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/

 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Camp27
-Bruce Clark
-Matt @ Wackey Worx
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks


Support our sponsors:

MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "BLACKFRIDAY2023" for 15% off & "CYBERMONDAY2023" for 15% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: Automatic discount when you checkout on Black Friday: https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off
Arbortech Carving Tools: "BRUCEAULRICH" for 10% off. (https://arbortechtools.idevaffiliate.com/127.html)

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/T90cTjs5ba8?si=vql5ROkbZCSs5QZA

Drew's most recent video:
https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc

Mark's most recent video:
https://youtu.be/ZqnhjSxhg10

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark has some expensive vet bills. Bruce makes some modern adirondak chairs. Drew messed up some walnut on his nightstand builds. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Camp27
-Bruce Clark
-Matt @ Wackey Worx
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)
-Monkey Business Woodworks

New:
-Ron Sager

Support our sponsors:

MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/T90cTjs5ba8?si=vql5ROkbZCSs5QZA

Drew's most recent video:
https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc

Mark's most recent video:
https://youtu.be/ZqnhjSxhg10

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark rips out some skylights. Bruce makes an unnecessary walnut island top. Drew bakes some wood in the oven. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Camp27
-Bruce Clark
-Matt @ Wackey Worx
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

New:
-Kevin Griffin ($2)
-Tom Kelly ($2)
-Rob Schneider ($3)
-Guy Penney ($2)
-Alain Monfils ($3)
-Bruce Clark ($28.50)
-Matt @ Wackey Worx ($20)

Support our sponsors:

MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/T90cTjs5ba8?si=vql5ROkbZCSs5QZA

Drew's most recent video:
https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc

Mark's most recent video:
https://youtu.be/ZqnhjSxhg10

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark goes hunting with his son and works some more on the concealment cabinet. Bruce does another craft show...find out the results. Drew passes on a laser and dreams up some more projects. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

New:
-Dennis Heynen

Support our sponsors:

MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/Vim52WpD3OQ?si=33L6A9_7vs4plMra

Drew's most recent video:
https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc

Mark's most recent video:
https://youtu.be/ZqnhjSxhg10

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark keeps a veneer-perfect walnut log all for himself. Bruce published episode 3 of the Master Closet Renovation series on his channel. Watch here: https://youtu.be/Vim52WpD3OQ?si=kGywL_fN3B0IEqWu . Drew published another laser video, but this time, show's how to make money with it. Watch it here: https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc . Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Link to the lumber storage shelves Mark mentioned: https://amzn.to/3Q7Ak3M

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

New:
-Byrom's Custom Woodworks and Ben Wilker upped their pledge to $20 to get last year's coin too!

Support our sponsors:

MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/Vim52WpD3OQ?si=33L6A9_7vs4plMra

Drew's most recent video:
https://youtu.be/yRZdyQZlheI?si=ExNTAGHYOKue_sqc

Mark's most recent video:
https://youtu.be/ZqnhjSxhg10

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode we have Will Britt from One Chair Creations on to tell his testimony and talk about woodworking!

Follow us on Instagram!

@faithtalkswood

@chaironecreations

@mountainvalleymakerllc

@flatwoodworks

Send us questions at questions@faithtalkswood.com

Support us on Patreon www.patreon.com/faithtalkswood

In this episode, Will and Tom discuss waiting on signs from God and being patient with your woodworking.

Follow us on social:

@FaithTalksWood

@Mountainvalleymakerllc

@Flatwoodworks

Send us questions: questions@faithtalkswood.com

Support us on Patreon www.patreon.com/faithtalkswood

In this episode, Mark tells about some of the different shooting targets he welded up and just how they work. They're pretty cool. Bruce dives in a dumpster for some boards (what's new). Drew Makes some sporting clay trophies. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/mVjkc6L_mmU?si=RdzQhWUCTnU7nPKR

Drew's most recent video:
https://youtu.be/gWFTTFJHNk8?si=YoNY3R-T2IGI705n

Mark's most recent video:
https://youtu.be/ZqnhjSxhg10

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Tom and Will discuss having endurance in your faith and woodworking. They also discuss their outlook on buying tools.

Follow the podcast on Instagram @faithtalkswood

Follow Tom @mountainvalleymakerllc

Follow Will @flatwoodworks

Send us your questions at questions@faithtalkswood.com

Support us on Patreon: www.patreon.com/faithtalkswood

In this episode, Mark deals with a skunk smell...in his house! Bruce released episode 1 of his Master Closet Renovation series. Check it out here: https://youtu.be/mVjkc6L_mmU?si=wllsuMRRHjANNxFF . Drew has lanterns up the wazoo...I mean, he's making and selling a ton of them. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

New: 
Glenn Scifres

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/mVjkc6L_mmU?si=RdzQhWUCTnU7nPKR

Drew's most recent video:
https://youtu.be/gWFTTFJHNk8?si=YoNY3R-T2IGI705n

Mark's most recent video:
https://youtu.be/ZqnhjSxhg10

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Tom and Will talk with Drew Fisher from Fishers Shop on YouTube. Drew gives his testimony of faith and woodworking as well as some fun facts about himself.

Follow Drew @FishersShop on YouTube and Instagram

Send us questions: questions@faithtalkswood.com

Follow Tom @mountainvalleymakerllc on Instagram

Follow Will @flatwoodworks on Instagram on Instagram and Facebook

Support us on Patreon at patreon.com/faithtalkswood

In this episode, Will and Tom discuss taking criticism of your faith and woodworking.

Send us questions at questions@faithtalkswood.com

Follow the podcast on Facebook and Instagram @faithtalkswood

Follow Tom on Instagram @mountainvalleymakerllc

Follow Will on Instagram @flatwoodworks

If you would like to support us financially, you can do so on Patreon at: www.patreon.com/faithtalkswood

In this episode, Mark quizzes the guys on their door parts knowledge. Bruce sweats it out in a tyvek suit. Drew gets THAT deal on Prime Day. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/QAWQwvu5B8c

Drew's most recent video:
https://youtu.be/6LoaCmB75Wg

Mark's most recent video:
https://youtu.be/ftm1e6WduUE

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark goes full PC. Bruce fixes a dust collector remote. Drew talks Lord of the Rings. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/QAWQwvu5B8c

Drew's most recent video:
https://youtu.be/6LoaCmB75Wg

Mark's most recent video:
https://youtu.be/ftm1e6WduUE

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark gets to sleep in his tree fort, even though that wasn't his intention. Bruce runs into trouble with his ultimate master closet reno. Drew sets his sights on what is next for him. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/QAWQwvu5B8c

Drew's most recent video:
https://youtu.be/6LoaCmB75Wg

Mark's most recent video:
https://youtu.be/ftm1e6WduUE

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark tells about an interesting car chase. Bruce released a new video about some interesting art pieces that are towel holders. Go watch it here: https://youtu.be/QAWQwvu5B8c
Drew went to a Detroit Tigers game and is making good progress on the Skittles game. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

New: 
-Jason Bertels

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/QAWQwvu5B8c

Drew's most recent video:
https://youtu.be/8XmD0M0PTGQ

Mark's most recent video:
https://youtu.be/ftm1e6WduUE

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark put out a new video about a solid walnut door with a secret. Give it a watch! Bruce smashes a couple of fingers with a mallet while installing floors. Drew learns a few things about propane. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

New: 
-Stephen Goggin

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/GMKDRktXjjk

Drew's most recent video:
https://youtu.be/8XmD0M0PTGQ

Mark's most recent video:
https://youtu.be/gk7D7yPkdMw

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark releases a new video about making a countertop from short boards. Bruce finally upgrades his OneFinity CNC. Drew reads some comments. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/8UvRvJE2mcs

Drew's most recent video:
https://youtu.be/8XmD0M0PTGQ

Mark's most recent video:
https://youtu.be/gk7D7yPkdMw

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)

In this episode, Mark tells all about a new game he invented. Bruce messes up some beds. Drew experiments with making a 4th axis for his OneFinity CNC. Plus, a ton more!

This episode is sponsored by OneFinity CNC! We have partnered with them and would love it if you would go to their website and check them out: https://www.onefinitycnc.com/
 (we don't have a coupon code at this time, but if you're able to mention that we sent you, it helps!)

Become a patron of the show!
http://patreon.com/webuiltathing

OUR TOP PATREON SUPPORTERS:
-Tom's Woodwork
-Tim Morrill
-Scott @ Dad It Yourself DIY: http://bit.ly/3vcuqmv
-Brent Jarvis: https://bit.ly/2OJL7EV
-Chris Simonton
-Maddux Woodworks YT: http://bit.ly/3chHe2p
-Byrom’s Custom Woodworks
-Ray Jolliff
-Ryder Clark
-Deo Gloria Woodworks (Matthew Allen) https://www.instagram.com/deogloriawoodworks/
-Henry Lootens (@Manfaritawood)
-Kris
-Ben Wilker with Wilker’s Woodcraft
-Brad Hoff
-Tommy Trease
-Will White
-Cody Elkins (maker of the Jenny bit)

Support our sponsors:
MagSwitch: https://mag-tools.com
-use code "WBAT" for 10% off
SurfPrep: https://www.surfprepsanding.com/?aff=48 
-use code "FISHER10" for 10% off
RZmask: use code "FISHER10" for 10% off
Bits & Bits: use code "FISHER10" for 10% off
Starbond: use code "BRUCEAULRICH15" for 15% off
Rotoboss: "GUNFLINT"
Merlin Moisture Meters: "FISHER10" https://www.merlin-humidification.com/wood-moisture-meters
Bidwell Wood & Iron/Atomic Finishes: "BRUCEAULRICH" for 10% off

We Built A Thing T-shirts! We have two designs to choose from! (You can get one of these as a reward at certain levels of support)
https://amzn.to/2GP04jf 
https://amzn.to/2TUrCr2

ETSY SHOPS:
Bruce: https://www.etsy.com/shop/BruceAUlrich?ref=simple-shop-header-name&listing_id=942512486

Drew: https://www.etsy.com/shop/FishersShopOnline?ref=simple-shop-header-name&listing_id=893150766

Mark: https://www.etsy.com/shop/GunflintDesigns?ref=search_shop_redirect

Bruce's most recent video:
https://youtu.be/8UvRvJE2mcs

Drew's most recent video:
https://youtu.be/QS0YpSBdNfU

Mark's most recent video:
https://youtu.be/85gfgPnYCrY

We are all makers, full-time dads and all have YouTube channels we are trying to grow and share information with others. Throughout this podcast, we talk about making things, making videos to share on YouTube, Instagram, Facebook, etc...and all of the life that happens in between.  CONNECT WITH US:
WE BUILT A THING: www.instagram.com/webuiltathing
WE BUILT A THING EMAIL: webuiltathing@gmail.com
FISHER'S SHOP: www.instagram.com/fishersshop/
BRUDADDY: www.instagram.com/brudaddy/
GUNFLINT DESIGNS: https://www.instagram.com/gunflintdesigns

Music by: Jay Fisher (Thanks, Jay!)