Logo

    osmodevcon2019

    Explore " osmodevcon2019" with insightful episodes like "getting started with Atmel | START on sysmoOCTSIM (osmodevcon2019)", "osmo-ccid-firmware: libosmocore+talloc on uC; USB testing from TTCN-3 (osmodevcon2019)", "implementing a harmonized shipping label generator (osmodevcon2019)", "osmo-ccid-firmware: libosmocore+talloc on uC; USB testing from TTCN-3 (osmodevcon2019)" and "getting started with Atmel | START on sysmoOCTSIM (osmodevcon2019)" from podcasts like ""Chaos Computer Club - archive feed", "Chaos Computer Club - archive feed", "Chaos Computer Club - archive feed", "Chaos Computer Club - archive feed (high quality)" and "Chaos Computer Club - archive feed (high quality)"" and more!

    Episodes (40)

    getting started with Atmel | START on sysmoOCTSIM (osmodevcon2019)

    getting started with Atmel | START on sysmoOCTSIM (osmodevcon2019)
    Because we couldn't find any decent multi-slot SIM card (e.g. smart card) reader, we decided to build our own: the sysmoOCTSIM. This use the recent Microchip SAM E54 micro-controller, which is only supported by the Atmel START web-based IDE. We will briefly present the sysmoOCTSIM and how to get started with Atmel START. about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/C8XLTD

    osmo-ccid-firmware: libosmocore+talloc on uC; USB testing from TTCN-3 (osmodevcon2019)

    osmo-ccid-firmware: libosmocore+talloc on uC; USB testing from TTCN-3 (osmodevcon2019)
    tales from the osmo-ccid-firmware development * writing USB device firmware on a Linux PC with a virtual USB bus + host controller * working with full libtalloc + libosmcoore in a microcontroller * testing USB devices and their protocols from TTCN3 about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/T3ASBY

    osmo-ccid-firmware: libosmocore+talloc on uC; USB testing from TTCN-3 (osmodevcon2019)

    osmo-ccid-firmware: libosmocore+talloc on uC; USB testing from TTCN-3 (osmodevcon2019)
    tales from the osmo-ccid-firmware development * writing USB device firmware on a Linux PC with a virtual USB bus + host controller * working with full libtalloc + libosmcoore in a microcontroller * testing USB devices and their protocols from TTCN3 about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/T3ASBY

    getting started with Atmel | START on sysmoOCTSIM (osmodevcon2019)

    getting started with Atmel | START on sysmoOCTSIM (osmodevcon2019)
    Because we couldn't find any decent multi-slot SIM card (e.g. smart card) reader, we decided to build our own: the sysmoOCTSIM. This use the recent Microchip SAM E54 micro-controller, which is only supported by the Atmel START web-based IDE. We will briefly present the sysmoOCTSIM and how to get started with Atmel START. about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/C8XLTD

    Doing long distance digital links using the HF radio band / Rhizomatica's HERMES project in Mexico (osmodevcon2019)

    Doing long distance digital links using the HF radio band / Rhizomatica's HERMES project in Mexico (osmodevcon2019)
    In this talk we will present the system we used in the HERMES (High-frequency Emergency and Rural Multimedia Exchange System), winner of the Off-the-Grid Internet Challenge of Mozilla WINS Challenge. At HERMES demonstration in Mexico the system was composed by a couple of ICOM IC-7100 radios (100W peak output power), doing NVIS (Near Vertical Incidence Skywave) skywave communication between a community in the mountains and capital of the state. An SDR modem designed to be used with standard HF transceivers, and the software to connect everything (including the Osmocom GSM stack) together with a GSM BTS were assembled to provide emergency communication to any isolated place. We plan to describe the system we assembled in HERMES, but especially discuss the challenges and what needs to be done for usable telecommunication systems to be used in the HF band, for contexts like the Amazon rainforest in South America, or Central Africa region (or any other place on Earth). Why there is no (civil) mobile phone standard which allows phones to use the HF band and skywave propagation for hundreds of kilometers links to the nearest hop ("HF BTS")? In Hermes we used Ardop (Amateur Radio Digital Open Protocol) as SDR modem and controller of the radio (the radio exposes two serial ports and has an internal sound card). Ardop has a standard operating modulation mode (4PSK) and an experimental OFDM mode, which uses 2 or 2.5kHz of (max.) bandwidth and have different options of coding rate. In NVIS transmission conditions, 1 up to 2kbit/s can be achieved. Software used for the HF link was Ardop and Rhizo-HF-connector (interface between the TNC and the Rhizomatica's CN). In HERMES demonstration, the HF backhaul was used by an adapted Rhizomatica's CN (which uses Osmocom stack) though an ESME to carry SMS and a PBX architecture which perform codec2 transcoding and asynchronous audio messages exchange over HF, in a transparent way to the users in an emergency struck situation. The presentation will include an small introduction to ionospheric (skywave) propagation, and the challenges for a higher bandwidth full-duplex HF telecommunication system. Some links: http://www.rhizomatica.org/hermes/ https://github.com/DigitalHermes about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/BZX338

    OsmocomBB Layer1 on Mediatek: Status Report (osmodevcon2019)

    OsmocomBB Layer1 on Mediatek: Status Report (osmodevcon2019)
    I would like to share my progress in porting layer1 to fernvale (MediaTek 626x chipset) and discuss how best to proceed with the goal of getting layer1+nuttx+mobile on fernvale as well as related devices like sim800[A-Z] and dz-09 like watches. Possibly also discussing newer chipsets like mtk6735/6737 (zte obsidian and orange pi 4g/iot board). about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/B9QSJS

    Running Osmocom combined with LTE (osmodevcon2019)

    Running Osmocom combined with LTE (osmodevcon2019)
    What do we need to do in order to operate a 4G/LTE network that's integrated with Osmocom 2G/3G? What do we need to do in order to operate a 4G/LTE network that's integrated with Osmocom 2G/3G? This is half presentation, half discussion. I don't think I have all the relevant answers, but it's pretty clear where the TODO areas are: * combined HLR+HSS with GSUP for Osmocom and DIAMETER for LTE * combined GGSN+P-GW with GTPv1 for Osmocom 2G/3G and GTPv2 for LTE What kind of options do we have to get there? What are pros and cons? about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/MEXDSL

    OsmocomBB Layer1 on Mediatek: Status Report (osmodevcon2019)

    OsmocomBB Layer1 on Mediatek: Status Report (osmodevcon2019)
    I would like to share my progress in porting layer1 to fernvale (MediaTek 626x chipset) and discuss how best to proceed with the goal of getting layer1+nuttx+mobile on fernvale as well as related devices like sim800[A-Z] and dz-09 like watches. Possibly also discussing newer chipsets like mtk6735/6737 (zte obsidian and orange pi 4g/iot board). about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/B9QSJS

    Doing long distance digital links using the HF radio band / Rhizomatica's HERMES project in Mexico (osmodevcon2019)

    Doing long distance digital links using the HF radio band / Rhizomatica's HERMES project in Mexico (osmodevcon2019)
    In this talk we will present the system we used in the HERMES (High-frequency Emergency and Rural Multimedia Exchange System), winner of the Off-the-Grid Internet Challenge of Mozilla WINS Challenge. At HERMES demonstration in Mexico the system was composed by a couple of ICOM IC-7100 radios (100W peak output power), doing NVIS (Near Vertical Incidence Skywave) skywave communication between a community in the mountains and capital of the state. An SDR modem designed to be used with standard HF transceivers, and the software to connect everything (including the Osmocom GSM stack) together with a GSM BTS were assembled to provide emergency communication to any isolated place. We plan to describe the system we assembled in HERMES, but especially discuss the challenges and what needs to be done for usable telecommunication systems to be used in the HF band, for contexts like the Amazon rainforest in South America, or Central Africa region (or any other place on Earth). Why there is no (civil) mobile phone standard which allows phones to use the HF band and skywave propagation for hundreds of kilometers links to the nearest hop ("HF BTS")? In Hermes we used Ardop (Amateur Radio Digital Open Protocol) as SDR modem and controller of the radio (the radio exposes two serial ports and has an internal sound card). Ardop has a standard operating modulation mode (4PSK) and an experimental OFDM mode, which uses 2 or 2.5kHz of (max.) bandwidth and have different options of coding rate. In NVIS transmission conditions, 1 up to 2kbit/s can be achieved. Software used for the HF link was Ardop and Rhizo-HF-connector (interface between the TNC and the Rhizomatica's CN). In HERMES demonstration, the HF backhaul was used by an adapted Rhizomatica's CN (which uses Osmocom stack) though an ESME to carry SMS and a PBX architecture which perform codec2 transcoding and asynchronous audio messages exchange over HF, in a transparent way to the users in an emergency struck situation. The presentation will include an small introduction to ionospheric (skywave) propagation, and the challenges for a higher bandwidth full-duplex HF telecommunication system. Some links: http://www.rhizomatica.org/hermes/ https://github.com/DigitalHermes about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/BZX338

    Running Osmocom combined with LTE (osmodevcon2019)

    Running Osmocom combined with LTE (osmodevcon2019)
    What do we need to do in order to operate a 4G/LTE network that's integrated with Osmocom 2G/3G? What do we need to do in order to operate a 4G/LTE network that's integrated with Osmocom 2G/3G? This is half presentation, half discussion. I don't think I have all the relevant answers, but it's pretty clear where the TODO areas are: * combined HLR+HSS with GSUP for Osmocom and DIAMETER for LTE * combined GGSN+P-GW with GTPv1 for Osmocom 2G/3G and GTPv2 for LTE What kind of options do we have to get there? What are pros and cons? about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/MEXDSL

    Osmo-GSM-Tester: (E)GPRS test setup (osmodevcon2019)

    Osmo-GSM-Tester: (E)GPRS test setup (osmodevcon2019)
    How we put all pieces together in osmo-gsm-tester to have (E)GPRS tests for different scenarios. Issues found during the process, fixes and workarounds. How we put all pieces together in osmo-gsm-tester to have (E)GPRS tests for different scenarios. Issues found during the process, fixes and workarounds. about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/MC89X9

    Production-Grade Cell Broadcast for Osmocom (osmodevcon2019)

    Production-Grade Cell Broadcast for Osmocom (osmodevcon2019)
    In Q2+Q3 2019, the speaker is working on a [funded] project to implement proper Cell Broadcast support in Osmocom. Let's cover the current status and the goals for this project, including * a proper OsmoCBC * 3GPP standard interfaces between CBC and BSC * OsmoBSC side scheduling of SMCB * 3G support for SABP (Service Area Broadcast) * Tools for easy generation of standard messages, particularly ETWS/CMAS/WEA/EU-ALERT/... about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/RUNUKK

    osmo-config-merge (osmodevcon2019)

    osmo-config-merge (osmodevcon2019)
    Introducing a small tool that can be used to manage incremental changes to libosmocore/vty-style configuration files. How it works + quick demo Introducing a small tool that can be used to manage incremental changes to libosmocore/vty-style configuration files. How it works + quick demo about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/SQULKJ

    Iu / 3G testing of OsmoMSC, OsmoSGSN + OsmoHNBGW using TTCN3 (osmodevcon2019)

    Iu / 3G testing of OsmoMSC, OsmoSGSN + OsmoHNBGW using TTCN3 (osmodevcon2019)
    Architecture of our upcming Iu test cases in TTCN-3 Architecture of our upcming Iu test cases in TTCN-3 * use of ASN.1 in TTCN-3 * TITAN vs. BER vs. APER * ffasn1c to the rescue * how to reuse existing 2G test cases (RAN_Emulation, ...) * types of bugs uncovered during first days of writing tests about this event: https://pretalx.sysmocom.de/osmodevcon2019/talk/Y78SSZ
    Logo

    © 2024 Podcastworld. All rights reserved

    Stay up to date

    For any inquiries, please email us at hello@podcastworld.io